Rear Side Door Upper Hinge and Lower Hinge Replacement

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Side Door Upper Hinge and Lower Hinge

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Apply masking tape to the edges of the door. Mark the location of the hinge before removing the bolts with a grease pencil.
1	Rear Side Door Hinge Bolt to Body (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure Keep the door in the closed position. Replace one hinge at a time. Tighten 32 N.m (24 lb ft)
2	Rear Side Door Hinge Bolt to Door (Qty: 2) Tighten 25 N.m (18 lb ft)
3	Rear Side Door Upper Hinge
4	Rear Side Door Hinge Bolt to Body (Qty: 2) Tighten 32 N.m (24 lb ft)
5	Rear Side Door Hinge Bolt to Door (Qty: 2) Tighten 25 N.m (18 lb ft)
6	Rear Side Door Lower Hinge Procedure Rear Side Door Adjustment