LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 340 (Steering Wheel And Steering Column) >> Repair Instructions >> Steering Wheel Replacement

Steering Wheel Replacement

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Steering Wheel
GM4378271Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Steering Wheel Airbag Replacement (With 3 Pin Design)Steering Wheel Airbag Replacement (With 2 Pin Design)
1 Steering Wheel Bolt

Procedure

  1. Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.
  2. Apply thread locking adhesive to the bolt. Adhesives, Fluids, Lubricants, and Sealers 
CAUTION:

Refer to Fastener Caution .


Tighten 
45 N.m (33 lb ft)
2 Steering Wheel

Procedure

  1. Disconnect the electrical connectors.
  2. Install the steering wheel bolt until 2 to 3 threads are engaged.
  3. Wiggle the steering wheel until the wheel disengages completely.
  4. Remove Steering Wheel Bolt
  5. Remove Steering Wheel
  6. Transfer components as necessary.
scientia non olet · About LEMON Manuals