Steering Column Lower Trim Cover Replacement (RPO N38)

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Steering Column Lower Trim Cover (RPO N38)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Steering Column Upper Trim Cover Replacement
1	Steering Column Lower Trim Cover Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Steering Column Lower Trim Cover Procedure Extended the steering column to its furthest point to clear the instrument panel knee bolster. Turn the steering wheel left and right to access the fasteners securing the lower trim cover to the turn signal switch bracket. Transfer components as necessary.

Callout

Component Name

Preliminary Procedure
Steering Column Upper Trim Cover Replacement

Steering Column Lower Trim Cover Bolt (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Steering Column Lower Trim Cover

Procedure

Extended the steering column to its furthest point to clear the instrument panel knee bolster.
Turn the steering wheel left and right to access the fasteners securing the lower trim cover to the turn signal switch bracket.
Transfer components as necessary.