LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 338 (Antilock Brake System) >> Diagnostic Information and Procedures >> DTC C0710: Steering Wheel Angle Signal >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

C0710 09 

The steering wheel angle sensor signal rate of change is to fast greater than 30°.

C0710 11 

The steering wheel angle sensor signal is above the maximum specification.

C0710 0A 

The steering wheel angle sensor signal has not changed.

C0710 0B 

The EBCM detects the steering angle sensor is unprogrammed.