Circuit/System Verification
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify the park assist option is activated in the driver information center (DIC).
- Select the driver outside mirror on S52 Outside Rearview Mirror Switch.
- Verify mirror functions properly when operating the S52 Outside Rearview Mirror Switch in UP/DOWN and LEFT/RIGHT positions.
- If the mirror does not function properly
Refer to Power Mirror Malfunction (Without AAB) Power Mirror Malfunction (With AAB) .
- If the mirror functions properly
- If the mirror does not function properly
- Select the passenger outside mirror on S52 Outside Rearview Mirror Switch.
- Verify mirror functions properly when operating the S52 Outside Rearview Mirror Switch in UP/DOWN and LEFT/RIGHT positions..
- If the mirror does not function properly
Refer to Power Mirror Malfunction (Without AAB) Power Mirror Malfunction (With AAB) .
- If the mirror functions properly
- If the mirror does not function properly
- Operate the memory 1 and 2 recall switches on S47D Seat Memory Switch - Driver.
- Verify the outside rearview mirrors adjust to the stored memory positions.
- If the mirrors do not adjust to the stored positions
Refer to Power Mirror Malfunction (Without AAB) Power Mirror Malfunction (With AAB) .
- If the mirrors adjust to the stored positions
- If the mirrors do not adjust to the stored positions
- Park brake on, vehicle running, shift the vehicle in REVERSE.
- Verify that the outside rearview mirrors tilt.
- If the driver outside mirror does not tilt
- Ignition OFF.
- Replace the S52 Outside Rearview Mirror Switch.
- Park brake on, vehicle running, shift the vehicle in REVERSE.
- Verify the driver mirror tilts.
- If the mirror does not tilt, replace the K40 Memory Seat Module.
- If the mirror tilts
- All OK.
- If the passenger outside mirror does not tilt
- Ignition OFF.
- Replace the S79P Passenger Window Switch.
- Park brake on, vehicle running, shift the vehicle in REVERSE.
- Verify the driver mirror tilts.
- If the mirror does not tilt, replace the K40 Memory Seat Control Module.
- If the mirror tilts
- All OK.
- If the mirrors tilt
- All OK.