Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Lock Cylinder Retainer, Lock Cylinder And Handle Bracket

Courtesy of GENERAL MOTORS COMPANY

NOTE:

Ensure that the door lock cylinder is engage all the way into the side door handle locator tabs. Insert the key into the door lock cylinder, turn left to right checking for binding before install the assembly to the vehicle.

Install the lock cylinder retainer (1) to the front side door outside handle bracket assembly (3).
Install the door lock cylinder (2) in the front side door outside handle bracket, push forward locking the lock cylinder (2) into the lock cylinder retainer.

Fig 2: Front Side Door Lock Cylinder Rod

Courtesy of GENERAL MOTORS COMPANY

Install Front Side Door Lock Cylinder Rod (1) @ Front Side Door Lock Cylinder

Fig 3: Front Door Outside Handle Bracket And Front Side Door Latch

Courtesy of GENERAL MOTORS COMPANY

Install Front Side Door Latch (2). Refer to Front Side Door Latch Replacement
Ensure that the door lock system operates properly before installing the trim.