Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Side Door Inside Handle Cable

Courtesy of GENERAL MOTORS COMPANY

Install Front Side Door Inside Handle Cable (1). Refer to Front Side Door Inside Handle Cable Replacement

Fig 2: Front Side Door Outside Handle Cable

Courtesy of GENERAL MOTORS COMPANY

Install Front Side Door Outside Handle Cable (1). Refer to Front Side Door Outside Handle Cable Replacement

Fig 3: Front Door Outside Handle Bracket And Front Side Door Latch

Courtesy of GENERAL MOTORS COMPANY

Install Front Door Outside Handle Bracket (1) @ Front Side Door Latch (2)

Fig 4: Front Side Door Latch Bolts (With Tightening Sequence)

Courtesy of GENERAL MOTORS COMPANY

CAUTION:

Refer to Fastener Caution

NOTE:

Install and torque the four latch bolts in proper sequence to prevent damage to the latch mechanism.

Install and tighten Front Side Door Latch Bolt (1) (Qty: 4) @ Front Side Door Latch (2) to 9 N.m (80 lb in)
Connect the electrical connector.

Fig 5: Front Side Door Outside Handle Bracket

Courtesy of GENERAL MOTORS COMPANY

Install Front Side Door Outside Handle Bracket (1). Refer to Front Side Door Outside Handle Bracket Replacement

Fig 6: Front Side Door Window Channel Retainer And Fasteners

Courtesy of GENERAL MOTORS COMPANY

Install Front Side Door Window Channel Retainer (2). Refer to Front Side Door Window Channel Retainer Replacement

Fig 7: Front Side Door Window Regulator And Fasteners

Courtesy of GENERAL MOTORS COMPANY

Install Front Side Door Window Regulator (2). Refer to Front Side Door Window Regulator Replacement
Inspect the door latch and outside handle for proper operation before installing the door trim.