LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 333 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> Door Ajar Indicator Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition On/Vehicle In Service Mode
  2. Verify the appropriate scan tool door ajar switch parameter changes when opening and closing the vehicle doors.
    • If the parameter state does not change 

      Refer to: Circuit/System Testing

    • If the parameter state changes 
  3. All OK.
scientia non olet · About LEMON Manuals