Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radio Control Bolt

Courtesy of GENERAL MOTORS COMPANY

Install Driver Information Display (2)

CAUTION:

Fastener Caution

Install Radio Control Bracket Bolt (1) and tighten 2.5 N.m (22 lb in)

Fig 2: Remove Radio Bracket Bolt

Courtesy of GENERAL MOTORS COMPANY

Install Radio Control Bracket (2)
Install Radio Bracket Bolt (1) and tighten 1.5 N.m (13 lb in)

Fig 3: Instrument Panel Center Air Outlet

Courtesy of GENERAL MOTORS COMPANY

Install Instrument Panel Center Air Outlet - IOB (1, 2)Instrument Panel Center Air Outlet Replacement (IO5/IO6)Instrument Panel Center Air Outlet Replacement (IOB)