Circuit/System Verification
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition » On / Vehicle » In Service Mode
- Verify DTC B0550 is not set.
- If the DTC is set
- Perform all necessary programming and setup procedures for the control module:K9 Body Control Module
- Verify the DTC does not set.
- If the DTC sets » Replace the component:K9 Body Control Module
- If the DTC is not set
- All OK.
- If the DTC is not set
- All OK.