Fastener Specifications
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Air Inlet Valve Actuator Bolt | 1.3 N.m (12 lb in) |
| Auxiliary Air Conditioning Evaporator and Blower Module Bolt | 2.5 N.m (22 lb in) |
| Auxiliary Air Conditioning Evaporator and Blower Module Nut | 9 N.m (80 lb in) |
| Auxiliary Heater and Air Conditioning Control Bolt | 1.0 N.m (9 lb in) |
| Ground Nut | 9 N.m (80 lb in) |
| Heater and Air Conditioning Mode Control Cam Cover Bolt | 2.5 N.m (22 lb in) |
| Instrument Panel Outer Air Outlet Duct Bolt | 2.5 N.m (22 lb in) |
| Mode Valve Actuator Bolt | 1.3 N.m (12 lb in) |
| Mode Valve Actuator Bolt(Auxiliary) | 1.5 N.m (13 lb in) |
| Temperature Valve Actuator Bolt | 1.3 N.m (12 lb in) |
| Temperature Valve Actuator Bolt(Auxiliary) | 1.5 N.m (13 lb in) |