LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (HVAC System - Automatic) >> Repair Instructions >> Mode Control Cam Replacement (and Levers) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Instrument Panel Tie Bar and Bolts
    GM4310267Courtesy of GENERAL MOTORS COMPANY
  1. Remove Instrument Panel Tie Bar (2)Instrument Panel Tie Bar Replacement
    2. Fig 2: Heater and Air Conditioning Mode Control Cam Cover Bolt
    GM4311566Courtesy of GENERAL MOTORS COMPANY
  2. Remove Heater and Air Conditioning Mode Control Cam Cover Bolt (1)
    3. Fig 3: Heater and Air Conditioning Mode Control Cam Cover
    GM4311570Courtesy of GENERAL MOTORS COMPANY
  3. Remove Heater and Air Conditioning Mode Control Cam Cover (1) @Heater and Air Conditioning Evaporator and Blower Module
    4. Fig 4: Mode Control Cam Actuator Sub-Lever - Vent Gear
    GM4311572Courtesy of GENERAL MOTORS COMPANY
  4. Remove Mode Control Cam (1)
  5. Remove Mode Control Cam Actuator Sub-Lever - Vent (2)
  6. Remove Mode Control Cam Actuator Sub-Lever - Vent Gear (3)
  7. Inspect the components and replace as necessary.
    8. Fig 5: Mode Valve Actuator
    GM4311574Courtesy of GENERAL MOTORS COMPANY
  8. Remove Mode Valve Actuator Bolt (1)
  9. Remove Mode Valve Actuator (2) @Heater and Air Conditioning Mode Control Cam Cover (3)
  10. Inspect the components and replace as necessary.
scientia non olet · About LEMON Manuals