LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (HVAC System - Automatic) >> Diagnostic Information and Procedures >> DTC B0173, B0178, B0509, B0514, B0519, B3583, or B3933: Air Temperature Sensor >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

The air temperature sensors are a 2-wire negative temperature co-efficient thermistors. The vehicle uses the following air temperature sensors:

This sensor operates using signal and low reference circuits. As the air temperature surrounding the sensor increases, the sensor resistance decreases. The sensor is capable of reading temperatures ranging from -40 to +80°C (-40 to +176°F), with a signal voltage between 0-5 V. If the HVAC control module detects a malfunctioning sensor the software uses a default air temperature value. The default action ensures that the HVAC system can adjust the inside air temperature near the desired temperature until the condition is corrected.