LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 324 (Seat Belt System) >> Diagnostic Information and Procedures >> DTC B0082: Seat Belt Reminder Sensor >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify, with the passenger seat unoccupied, the scan tool Passenger Seat Occupancy Status parameter is Empty Seat.
    • If not Empty Seat 

      Refer to Circuit/System Testing

    • If Empty Seat 
  3. Verify, with the passenger seat occupied, the scan tool Passenger Seat Occupancy Status parameter is Occupied.
    • If not Occupied 

      Refer to Circuit/System Testing

    • If Occupied 
  4. All OK.
scientia non olet · About LEMON Manuals