LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 321 (Battery, Charging System And Starting System) >> Repair Instructions >> Starter Replacement (LCV - AWD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection (Without KL9) Battery Negative Cable Disconnection and Connection (With KL9) 
  2. Fig 1: Transfer Case Assembly
    GM4289095Courtesy of GENERAL MOTORS COMPANY
  3. Remove Transfer Case Assembly (2)Power Transfer Unit Case Replacement
  4. Fig 2: Battery Positive Cable And Nut
    GM4377337Courtesy of GENERAL MOTORS COMPANY
  5. Remove Battery Positive Cable Nut (2)
  6. Remove Battery Positive Cable (1)
  7. Fig 3: Starter Mounting Bolt
    GM4377338Courtesy of GENERAL MOTORS COMPANY
  8. Remove Starter Mounting Bolt (1)
  9. Fig 4: Electrical Connector And Starter
    GM4377339Courtesy of GENERAL MOTORS COMPANY
  10. Remove Starter (2)
  11. Disconnect Electrical Connector (1)