LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 321 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Replacement (With KL9) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING:

    Refer to Battery Disconnect Warning .

    Fig 1: Battery Negative Cable
    GM4285190Courtesy of GENERAL MOTORS COMPANY
  1. Use an open ended wrench to hold the battery sensor ground tab, while loosening the battery negative cable nut.(2)
  2. Battery Negative Cable Nut (1)
  3. Battery Negative Cable (3)
    4. Fig 2: Battery Negative Cable And Battery Negative Cable Frame Ground Fastener
    GM4285808Courtesy of GENERAL MOTORS COMPANY
  4. Remove Battery Negative Cable Frame Ground Fastener (1)
  5. Remove Battery Negative Cable (2)
    6. Fig 3: Battery Negative Cable And Battery Negative Cable Ground Fastener
    GM4378468Courtesy of GENERAL MOTORS COMPANY
  6. Remove Battery Negative Cable Ground Fastener (1)
  7. Remove Battery Negative Cable (2)
  8. Disengage Retainer (3)
  9. Remove Battery Negative Cable (4)
scientia non olet · About LEMON Manuals