Conditions for Setting the DTC

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

DTC P058A

The battery sensor module detects an internal fault.

DTC P058B

The battery sensor module detects an internal fault after comparing an induced 50 μA current to the battery sensor module calculated current.

DTC P058C

The battery sensor module detects a difference between raw temperature values to be 10.00 Celsius or more for 8 out of 10 samples.

DTC P058D

An absolute difference of 5.00 V or more is detected between the 12 V system reference voltage measured by the ECM, and 12 V battery voltage measured by the battery sensor module for 32 out of 40 samples.

DTC P058E

The battery sensor module detects a raw temperature 2 value of 120.00 Celsius or more for 4 out of 5 samples.

DTC P058F

The battery sensor module detects a raw temperature 2 value of -43.00 Celsius or less for 4 out of 5 samples.

DTC P16DC

The battery sensor module does not properly execute wakeups while the vehicle is asleep.

DTC P16DD

The battery sensor module detects a current of greater than 1400 A.

DTC P16DE

The battery sensor module detects an internal temperature of 120.00 Celsius or more for 4 out of 5 samples.

DTC P16DF

The battery sensor module detects an internal temperature of -43.00 Celsius or less for 4 out of 5 samples.

DTC P16D4

The battery sensor module detects a voltage of less than 3 V.

DTC P16D5

The battery sensor module detects a voltage of greater than 26 V.

DTC P16D6

The battery sensor module detects a current of less than -1400 A.

DTC P16E1

The battery sensor module detects a RAM memory fault.

DTC P16E2

The battery sensor module detects a ROM memory fault.

DTC P16E3

The battery sensor module is not using the correct configuration information it receives from the ECM.