Circuit/System Verification
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, measure and record the battery voltage at the battery terminals.
- Verify the battery voltage stabilizes between 12.4 and 12.8 V within a few minutes of turning the ignition OFF.
- If battery voltage is less than 12.4 V or more than 12.8 V
Refer to Battery Inspection/Test .
- If battery voltage is between 12.4 and 12.8 V
- If battery voltage is less than 12.4 V or more than 12.8 V
- Engine running, headlights ON, measure and record the battery voltage at the battery terminals.
- Verify the voltage is at least 1 V greater than the voltage measured in step 1, but less than 15 V.
- If the voltage is not at least 1 V greater than the voltage measured in step 1 or is greater than 15 V.
Refer to Charging System Test .
- If the voltage is at least 1 V greater than the voltage measured in step 1, but less than 15 V.
- If the voltage is not at least 1 V greater than the voltage measured in step 1 or is greater than 15 V.
- Refer to Circuit/System Testing.