Center Pillar Lower Trim Panel Replacement

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Center Pillar Lower Trim Panel

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Front Side Door Sill Garnish Molding Replacement Rear Side Door Sill Garnish Molding Replacement Remove the driver or passenger seat belt anchor plate tensioner cover and fastener. Front Seat Belt Retractor Replacement Move the seat to the full forward position.
1	Center Pillar Lower Trim Panel Procedure Pull the trim panel toward the inside of the vehicle to disengage the retainers. Ensure the seat belt webbing does not become trapped during installation.

Callout

Component Name

Preliminary Procedures

Front Side Door Sill Garnish Molding Replacement
Rear Side Door Sill Garnish Molding Replacement
Remove the driver or passenger seat belt anchor plate tensioner cover and fastener. Front Seat Belt Retractor Replacement
Move the seat to the full forward position.

Center Pillar Lower Trim Panel

Procedure

Pull the trim panel toward the inside of the vehicle to disengage the retainers.
Ensure the seat belt webbing does not become trapped during installation.