Removal Procedure
WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The orange or yellow connector position assurance (CPA) must be released first to disconnect or to connect the connector.
- Lift the orange or yellow CPA vertically (avoid lifting on an angle to the connector) approximately 4 mm to release the connector. Use a small flat-bladed tool to help release the CPA. The CPA may also be released manually without any tools.
- Grab the connector on both sides and lift vertically to disconnect the connector.