Body Wiring Harness Junction Block Replacement

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Body Wiring Harness Junction Block

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Battery Negative Cable Disconnection and Connection (Without KL9)Battery Negative Cable Disconnection and Connection (With KL9) . Quarter Lower Rear Trim Panel Replacement (Left Side With All Terrain)Quarter Lower Rear Trim Panel Replacement (Right Side With All Terrain)Quarter Lower Rear Trim Panel Replacement (Left Side Without All Terrain)Quarter Lower Rear Trim Panel Replacement (Right Side Without All Terrain)
1	Body Wiring Harness Junction Block Nut CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Body Wiring Harness Junction Block Procedure Disconnect all electrical connectors. Release the top retainer, tip the fuse block outward and pull the fuse block rearward out of the rear inner quarter panel.

Callout

Component Name

Preliminary Procedures

Battery Negative Cable Disconnection and Connection (Without KL9)Battery Negative Cable Disconnection and Connection (With KL9) .
Quarter Lower Rear Trim Panel Replacement (Left Side With All Terrain)Quarter Lower Rear Trim Panel Replacement (Right Side With All Terrain)Quarter Lower Rear Trim Panel Replacement (Left Side Without All Terrain)Quarter Lower Rear Trim Panel Replacement (Right Side Without All Terrain)

Body Wiring Harness Junction Block Nut

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Body Wiring Harness Junction Block

Procedure

Disconnect all electrical connectors.
Release the top retainer, tip the fuse block outward and pull the fuse block rearward out of the rear inner quarter panel.