LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 311 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Rear Seat Pull Strap Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Seat Pull Strap
    GM4381041Courtesy of GENERAL MOTORS COMPANY
  1. Install Rear Seat Pull Strap (1)
  2. Route the pull strap webbing over the pull strap wire and through the slot on the seat back frame.
    3. Fig 2: Rear Seat Pull Strap Rivet and Cable
    GM4381040Courtesy of GENERAL MOTORS COMPANY
  3. Install Rear Seat Pull Strap Rivet (1)
  4. Connect the cable (2) to the recliner.
    5. Fig 3: 3rd Row Seat Back Cover and Pad
    GM4381035Courtesy of GENERAL MOTORS COMPANY
  5. Install 3rd Row Seat Back Cover and Pad (1, 2). Refer to 3rd Row Seat Back Cover and Pad Replacement 
scientia non olet · About LEMON Manuals