LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 311 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Driver or Passenger Seat Back Cushion Frame Replacement

Driver or Passenger Seat Back Cushion Frame Replacement

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Driver or Passenger Seat Back Cushion Frame
GM4205982Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
WARNING:

Refer to SIR Warning .

Procedure Remove Driver or Passenger Seat Back Cover and Pad. Refer to Driver or Passenger Seat Back Cover and Pad Replacement 
1 Driver or Passenger Seat Back Frame Fastener (Qty: 4)
CAUTION:

Refer to Fastener Caution .


Tighten 
35 N.m (26 lb ft)
2 Driver or Passenger Seat Back Cushion Frame

Procedure

  1. Disconnect the electrical connector.
  2. Transfer components as necessary.
scientia non olet · About LEMON Manuals