LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC B097C: Power Mode Run/Start Indicator Circuit >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON/Vehicle in Service Mode.
  2. Verify the green LED turns ON and OFF when commanding the Run/Start Power Mode Indicator On and Off with the scan tool.
    • If the green LED does not turn ON and OFF 

      Refer to Circuit/System Testing.

    • If the green LED turns ON and OFF 
  3. All OK.
scientia non olet · About LEMON Manuals