LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 301 (Power Seat System) >> Diagnostic Information and Procedures >> DTC B1735, B1740, B1745, B1750, B1755, B1760, B1815, or B1820: Seat Switch Circuits >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the scan tool seat switch parameters listed below change between Inactive and Forward/Rearward or UP/Down when pressing the appropriate seat directional switch.
    • Driver Seat Cushion Front Vertical Switch
    • Driver Seat Cushion Rear Vertical Switch
    • Driver Seat Horizontal Switch
    • Driver Seat Back Switch
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • If the parameter changes 
  3. All OK.
scientia non olet · About LEMON Manuals