Circuit/System Verification
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition On/Vehicle in Service Mode.
- Verify the scan tool Trunk Lid/Liftgate Window Exterior Unlatch Switch parameter changes between Active and Inactive when pressing and releasing the S58A Rear Compartment Lid Unlatch Switch-Exterior.
- If the parameter does not change
Refer to Circuit/System Testing - Exterior Trunk Release Switch Inoperative
- If the parameter changes
- If the parameter does not change
- Verify the scan tool Interior Trunk Lid/Liftgate Window Unlatch Switch parameter changes between Inactive and Active when pressing the S58B Rear Compartment Lid Unlatch Switch-Interior.
- If the parameter does not change
Refer to Circuit/System Testing - Interior Trunk Release Switch Inoperative
- If the parameter changes
- If the parameter does not change
- Verify the M40 Rear Compartment Lid Latch functions when commanding the Trunk Lid Unlatch with a scan tool.
- If the M40 Rear Compartment Lid Latch does not function
Refer to Circuit/System Testing - Release Actuator Inoperative
- If the M40 Rear Compartment Lid Latch does function
- If the M40 Rear Compartment Lid Latch does not function
- All OK.