Circuit/System Verification
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify the scan tool Exterior Left Rear Door Handle Switch or the Exterior Right Rear Door Handle Switch parameters changes between Active and Inactive when pressing and releasing A24LR Door Handle Assembly-Left Rear Exterior or the A24RR Door Handle Assembly-Right Rear Exterior.
- If the parameter does not change
Refer to Circuit/System Testing.
- If the parameter changes
- If the parameter does not change
- All OK.