Fastener Specifications
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Clutch Actuator Cylinder Bolt | 13 N.m (115 lb in) |
| Clutch Pedal Assembly to Brake Pedal Bolts | 20 N.m (15 lb ft) |
| Clutch Pedal Position Switch Bolt | 2.5 N.m (22 lb in) |
| Clutch Pressure Plate Bolt | See procedure for specific tightening sequence and torque values. |
| Clutch Slave Cylinder | 9 N.m (80 lb in) |
| Concentric Actuator Cylinder Bolt | 13 N.m (115 lb in) |