LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 281 (Manual Transmission Clutch) >> Repair Instructions >> Clutch Concentric Actuator Cylinder Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Clutch Slave Cylinder
    GM4144261Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Position the clutch slave cylinder (2) on the transmission.
  2. Install the clutch slave cylinder and bolts (1) and tighten to 9 N.m (80 lb in).
  3. Install the manual transmission to the vehicle. Refer to Transmission Replacement (M3L)Transmission Replacement (MG9) .
scientia non olet · About LEMON Manuals