LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 279 (Engine Controls And Fuel - 2.0L (LTG) - DTC P0300 To DTC P2635 And Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Inspection/Maintenance (I/M) System DTC Table (LCV)

Inspection/Maintenance (I/M) System DTC Table (LCV)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
System DTCs Required to Set System Status to YES
If an I/M System Status indicator did NOT update to YES during the Inspection/Maintenance Complete System Set Procedure , review each indicator and reference this table to determine each DTC associated with the I/M System Status Indicator. Each DTC listed below has specific conditions that must be met for the diagnostic to run. Included within the conditions are additional DTCs, which if set, may inhibit the DTCs listed below from running. Reviewing and operating the vehicle within the Conditions for Running for each DTC listed below will allow the I/M System Status Indicators to transition to YES.
Catalyst DTC P0420 
EGR/CMP DTC P0011 or P0014
EVAP
Fuel System
HO2S DTC P0030-P0032, P0036-P0038, P0053, P0054, P0135, or P0141
HO2S/O2S DTC P0133, P013A, P013B, P013E, P013F, P015A, P015B, P2270, or P2271