Circuit/System Verification
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, observe the scan tool DTC information. Verify that DTC P159F or P15A0 is not set.
- If DTC P159F or P15A0 is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If DTC P159F or P15A0 is not set
- If DTC P159F or P15A0 is set
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Circuit/System Testing.
- If the DTC does not set
- If the DTC sets
- All OK.