LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 278 (Engine Controls And Fuel - 3.6L (LGX LF4) - DTC P0117 (LGX) To DTC P0697) >> Diagnostic Information and Procedures >> DTC P034A or P034B: Crankshaft Position Sensor >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

P034A 

Condition1 

The difference between the memorized and actual crankshaft position was greater than 2 reluctor ring teeth during 2 autostart events in one ignition cycle.

Condition 2 

The difference between the memorized and actual crankshaft position was greater than 1 reluctor ring teeth during 4 autostart events in one ignition cycle.

P034B 

The direction of rotation of the crankshaft has changed more than 3 times within 4 s.