Conditions for Running the DTC
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
P0335 Condition 1
- The starter is engaged and the engine control module detects camshaft position sensor pulses.
Or
- DTCs P0101, P0102 and P0103 are not set.
And
- The airflow into the engine is greater than 3 g/s.
Condition 2
- DTC P0651 is not set.
- The engine is running and the starter is not engaged.
Condition 3
- DTCs P0365, P0366, P0641, and P0651 are not set.
- The engine is running or the starter is engaged.
P0336 Condition 1
- DTCs P0335 or P0651 are not set.
- The airflow into the engine is greater than 3 g/s.
- Engine speed is greater than 450 RPM.
Condition 2
- DTC P0651 is not set.
- The engine is running and the starter is not engaged.
Condition 3
- The starter is engaged and the engine control module detects camshaft position sensor pulses.
Or
- DTCs P0101, P0102, and P0103 are not set.
- The airflow into the engine is greater than 3 g/s.
Condition 4
- DTCs P0365, P0366, P0641, and P0651, are not set.
- The engine is running or the starter is engaged.
The DTCs run continuously once the above conditions are met.