Circuit/System Verification
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON
- Verify the circuit status parameters listed below do not display Malfunction when commanding the Charge Air Cooler Coolant Pump ON and OFF with a scan tool:
- Charge Air Cooler Coolant Pump Relay Control Circuit Low Voltage Test Status
- Charge Air Cooler Coolant Pump Relay Control Circuit Open Test Status
- Charge Air Cooler Coolant Pump Relay Control Circuit High Voltage Test Status
- If Malfunction is displayed
Refer to Circuit/System Testing
- If Malfunction is not displayed
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify a DTC does not set.
- If a DTC sets
Refer to Circuit/System Testing
- If a DTC does not set
- If a DTC sets
- All OK