Circuit/System Verification
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify the left and right stop lamps and center high mounted stop lamp on the vehicle turn ON and OFF when commanding the Stop Lamps ON and OFF with a scan tool.
- If the left and right stop lamps and center high mounted stop lamp does not turn ON and OFF
Refer to Stop Lamps Malfunction .
- If the left and right stop lamps and center high mounted stop lamp turns ON and OFF
Refer to Circuit/System Testing.
- If the left and right stop lamps and center high mounted stop lamp does not turn ON and OFF