Driver or Passenger Seat Vertical Adjuster Actuator Replacement

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Driver or Passenger Seat Vertical Adjuster Actuator

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the driver or passenger seat. Refer to Driver or Passenger Seat Removal and Installation . Remove the driver or passenger seat cushion outer finish panel. Refer to Driver or Passenger Seat Cushion Outer Finish Panel Replacement (Sedan)Driver or Passenger Seat Cushion Outer Finish Panel Replacement (Coupe)Driver or Passenger Seat Cushion Outer Finish Panel Replacement (with W2E) . Remove the front seat cushion side finish panel. Refer to Front Seat Cushion Side Finish Panel Replacement .
1	Driver or Passenger Seat Vertical Adjuster Actuator Bolt CAUTION: Refer to Fastener Caution . Tighten 20 N.m (15 lb ft)
2	Driver or Passenger Seat Vertical Adjuster Actuator Fastener Tighten 42 N.m (31 lb ft)
3	Driver or Passenger Seat Vertical Adjuster Actuator Procedure Disconnect the electrical connector. Remove the adjuster vertical actuator from the cushion frame.