Circuit/System Verification
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the seat directional motors listed below operate while operating the appropriate seat switches in both directions.
- M51P Horizontal Motor - Passenger
- M50P Front Vertical Motor - Passenger
- M55P Rear Vertical Motor - Passenger
- M56P Recline Motor - Passenger
- If all seat motors do not operate
Refer to Circuit/System Testing - Seat Adjuster Switch Circuit Test.
- if only the seat horizontal motor does not operate
- Ignition ON.
- Verify the scan tool Passenger Seat Horizontal switch parameter changes between Inactive and Forward/Rearward when pressing the seat horizontal switch in both directions.
- If the parameter does not change, Refer to Circuit/System Testing - Seat Horizontal Switch Signal Circuit Test.
- If the parameter changes, refer to the Refer to Circuit/System Testing - Seat Horizontal Motor Control Circuit Test.
- If 1 or more seat motors operate but not all
Refer to Circuit/System Testing - Seat Motor Control Circuit Test.
- If all seat motors operate
- All OK.