Circuit/System Description

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

The easy entry seat switch is located in the seat backrest with the seat easy entry handle. When the seat easy entry forward switch is pressed, battery voltage is applied through the signal circuit to the seat memory control module indicating the easy entry seat command. The seat memory control module then applies battery voltage through the seat horizontal motor forward control circuit and ground through the seat horizontal motor rearward control circuit to the motor. The motor runs to move the entire seat forward to it's the furthest forward position or the switch is released. Moving the entire seat rearward works similarly to moving the entire seat forward, except that battery voltage and ground are applied on the opposite circuits causing the motor to run in the opposite direction.