Fastener Specifications
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Seat Belt Buckle Fastener | 40 N.m (30 lb ft) |
| Rear Center Seat Belt Retractor Fastener | 45 N.m (33 lb ft) |
| Rear Seat Belt Buckle Nut | 45 N.m (33 lb ft) |
| Rear Seat Belt Retractor Anchor Plate Bolt | 45 N.m (33 lb ft) |
| Rear Seat Belt Retractor Bolt (Lower) | 45 N.m (33 lb ft) |
| Rear Seat Belt Retractor Bolt (Upper) | 45 N.m (33 lb ft) |