Fastener Specifications
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front End Spoiler Bolt | 2.5 N.m (22 lb in) |
| Front Grille Opening Cover Bolt | 2.5 N.m (22 lb in) |
| Front Lower Grille Bolt | 2.5 N.m (22 lb in) |
| Quarter Panel Tail Lamp Upper Molding Screw | 2.5 N.m (22 lb in) |
| Rear End Spoiler Nut | 7 N.m (62 lb in) |