Installation Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate the wheel drive shaft sealing surface of the oil seal with axle lubricant. Refer to Adhesives, Fluids, Lubricants, and Sealers .
- Install the right differential output shaft seal (1) using a suitable seal driver.
- Install the right front wheel drive shaft. Refer to Front Wheel Drive Shaft Replacement - Right Side .
- Inspect the fluid level. Refer to Front Axle Lubricant Level Inspection .
- Lower the vehicle.