LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Disc Brake System) >> Repair Instructions >> Rear Brake Caliper Hardware Replacement (J6G) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the brake caliper pins and brake pad springs for damage or excessive corrosion and replace, if necessary. Rear Disc Brake Mounting and Hardware Inspection 
    2. Fig 1: Disc Brake Pad Spring
    GM4004074Courtesy of GENERAL MOTORS COMPANY
  2. Install Disc Brake Pad Spring (1)
    3. Fig 2: Brake Pad Guide Pin
    GM4004071Courtesy of GENERAL MOTORS COMPANY
  3. Install Brake Pad Guide Pin (1)
  4. Ensure the brake pad guide pins are fully seated in the brake caliper.
  5. Install Tire and Wheel. Tire and Wheel Removal and Installation (Non V-Series)Tire and Wheel Removal and Installation (V-Series)
scientia non olet · About LEMON Manuals