LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Disc Brake System) >> Repair Instructions >> Front Brake Caliper Hardware Replacement (J55) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Brake Pad Spring
    GM2827321Courtesy of GENERAL MOTORS COMPANY
  1. Install the brake pad spring (1).
    2. Fig 2: Brake Caliper Pins
    GM2827318Courtesy of GENERAL MOTORS COMPANY
  2. Carefully drive the brake pad pins (1) into the brake caliper.
  3. Ensure the brake pad pin is fully seated in the brake caliper.
  4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Non V-Series)Tire and Wheel Removal and Installation (V-Series) .
scientia non olet · About LEMON Manuals