Removal Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Instrument Panel Tie Bar

Courtesy of GENERAL MOTORS COMPANY

Remove the instrument panel tie bar (1). Refer to Instrument Panel Tie Bar Replacement .

Fig 2: Brake Pedal Position Sensor

Courtesy of GENERAL MOTORS COMPANY

Remove the brake pedal position sensor (1). Refer to Brake Pedal Position Sensor Replacement .

Fig 3: Brake Pedal

Courtesy of GENERAL MOTORS COMPANY

Pull the brake pedal (1) rearward to release the power vacuum brake booster pushrod retainer.

Fig 4: Power Vacuum Brake Booster Pushrod Retainer

Courtesy of GENERAL MOTORS COMPANY

NOTE:

Do not reuse the power vacuum brake booster pushrod retainer.

Remove and discard the power vacuum brake booster pushrod retainer (1).

Fig 5: Power Vacuum Brake Booster Nuts

Courtesy of GENERAL MOTORS COMPANY

Remove the power vacuum brake booster nuts (1).

Fig 6: Brake Pedal Assembly Nuts

Courtesy of GENERAL MOTORS COMPANY

Remove the brake pedal assembly nuts (1).
Remove the brake pedal assembly.