LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Hydraulic Brake System) >> Repair Instructions >> Brake Fluid Level Indicator Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Brake Fluid Level Indicator Switch
    GM2815580Courtesy of GENERAL MOTORS COMPANY
  1. Install the brake fluid level indicator switch (1).
  2. Ensure the locking tabs of the brake fluid level indicator switch are fully engaged in the master cylinder reservoir.
  3. Connect the brake fluid level indicator switch electrical connector.
scientia non olet · About LEMON Manuals