Removal Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Front Bumper Fascia Replacement Front Bumper Fascia Replacement (V)
- Place the bumper fascia face down on a clean protective surface.
- Disconnect the wiring harness retainers from the front bumper fascia and reposition as necessary.
- Front Bumper Fascia Energy Upper Absorber Threaded Retainer (1) -Remove
- Front Bumper Fascia Energy Upper Absorber Clip (2) -Remove
- Front Bumper Fascia Energy Upper Absorber-Outer (3) -Remove
- Front Bumper Fascia Energy Upper Absorber Clip (1) -Remove
- Front Bumper Fascia Energy Upper Absorber -Inner (2) -Remove