Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Bumper Fascia Energy Upper Absorber (Coupe Outer)

Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia Energy Upper Absorber-Inner (1) -Install
Front Bumper Fascia Energy Upper Absorber Clip (2) -Install

Fig 2: Front Bumper Fascia Energy Upper Absorber (Coupe Inner)

Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia Energy Upper Absorber-Outer (3) -Install
Front Bumper Fascia Energy Upper Absorber Clip (2) -Install
Front Bumper Fascia Energy Upper Absorber Threaded Retainer (1) -Install
Connect the wiring harness retainers to the front bumper fascia and reposition as necessary.
Front Bumper Fascia Replacement Front Bumper Fascia Replacement (V)