Circuit/System Verification
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition » On / Vehicle » In Service Mode
- Perform the scan tool control function:Door Dead Lock Lock/Unlock»Lock
Verify the correct operation:Interior Door Handle Disabled
- If the component does not work as specified
Refer to: Circuit/System Testing
- If the component works as specified
- If the component does not work as specified
- Perform the scan tool control function:Door Dead Lock Lock/Unlock»Unlock
Verify the correct operation:Interior Door Handle»Enabled
- If the component does not work as specified
Refer to: Circuit/System Testing
- If the component works as specified
- If the component does not work as specified
- All OK.