Removal Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front side door trim. Refer to Front Side Door Trim Replacement (Coupe) .
- Remove the front side door water deflector.
- Disconnect the electrical connectors.
- Loosen the screw for the lock cylinder bezel. Refer to Front Side Door Lock Cylinder Bezel Replacement .
- Remove the front side door outside handle (1) from the door as follows:
- Open the door handle fully.
- Slide the door handle rearward releasing the handle from the door handle bracket.
- Remove the front side door outside handle and connector from the door.
NOTE:
When removing the door lock cylinder screw Do Not go past the hard stop.