Rear Body Exhaust Heat Shield Replacement (LGX)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exhaust Rear Muffler Heat Shield (LGX)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disconnect Rear Bumper Fascia@Exhaust Rear Muffler Heat Shield - Rear Bumper Fascia Replacement Exhaust System Replacement (LGX)
1	Rear Body Exhaust Heat Shield Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Rear Body Exhaust Heat Shield Fastener (Qty: 10) Tighten 1.75 N.m (15 lb in)
3	Rear Body Exhaust Heat Shield